Rolife Christmas Melody Tree Music Dreamer AMS01 Troubleshooting & FAQ

Product: Rolife Christmas Melody Tree Music Dreamer
SKU: AMS01
Product type: Music Box 3D Wooden Puzzle

Quick answer: This guide covers electronic-part response, touch-switch sensitivity, E5 fitting, reverse disk rotation and rotation that stops after the tree is assembled. Need the complete build sequence or PDF manual? Visit the Rolife Christmas Melody Tree AMS01 Assembly Instructions page, or browse all Robotime assembly guides and manuals. For missing, broken, uncut or visibly warped parts, use Part Replacement.

In This Guide

• Power and Touch Control Problems
• Common Assembly Problems
• Rotation Problems
• Need More Help?

Power and Touch Control Problems

Why Is There No Response When I Check the Electronic Parts?

1. Check whether each electronic part is inserted in the correct place.

2. Low touch-switch sensitivity before assembly is normal. Slightly adjust the placement of the electronic parts to see whether they respond. After assembly, the touch pad has a larger sensing area and becomes more sensitive.

Common Assembly Problems

Why Is Part E5 Difficult to Assemble?

Solution: Lightly sand the protruding areas indicated for E5.

Rotation Problems

Why Does the Disk Rotate Abnormally in Reverse?

Cause: The relevant part has been inserted incorrectly.

Solution: Recheck its orientation against the AMS01 instructions and insert it in the correct direction.

Why Does the Disk Stop Rotating After the Tree Is Assembled?

Cause: Part L7 is assembled in the wrong sequence. This creates a gap between E9 and E16 that interferes with assembly of the tree.

Solution: Reassemble L7 in the sequence shown in the AMS01 instructions so E9 and E16 fit together correctly.

Need More Help?

If your issue is not covered here or the problem continues after these checks, email service@robotime.com or contact Robotime Support.

Mis à jour le 12 oct. 2026